How to Run a Contractual Insurance Review

Logo flourish vector right hand side

Last Updated: November 2, 2026

Quick Summary

A contractual insurance review is a clause-by-clause comparison of what a contract requires you to insure against and what your policy actually covers. The service flags gaps where the contract demands more than the policy delivers, and overlaps where you pay for cover the contract never asked for.

  • Gather every policy, full policy wording, schedules, endorsements, the agreement and any certificate before the review starts.
  • A certificate of insurance proves cover existed on its issue date, not that it matches the contract.
  • Rank each gap by likelihood and cost using a simple three-by-three matrix.
  • Each ranked gap takes one of four routes: amend the contract, extend the policy, negotiate a mutual cap, or accept in writing.
  • A contractual insurance review is not legal advice, not a negotiation service, and not a guarantee a claim will be paid.

Table of Contents

What a Contractual Insurance Review Service Actually Does

A contractual insurance review service checks the insurance clauses in your contracts against your policy cover and flags where they don’t match.

Your contract says you’ll hold cover. Your policy wording says something narrower. Nobody notices until a claim lands.

A contractual insurance review is a clause-by-clause comparison of what a contract requires you to insure against and what your policy actually covers.

Where the Review Sits Between Your Contract and Your Policy

The work usually covers:

  • Insurance clauses naming required covers, limits and extensions
  • Policy wording showing what is actually granted, excluded or capped
  • Gaps, where the contract demands more than the policy delivers

The Australian Securities and Investments Commission’s guidance on general insurance sets out how policy terms and disclosure work for buyers. Worth a read before you sign anything.

The Contract Review Checklist for Insurance Requirements

Start with a contract review checklist for insurance so nothing gets missed. A structured list beats a careful read, because careful reads skip things. Work through it clause by clause, recording a finding rather than a tick.

Work through each contract and record the answer for every line:

  • Required covers named in the contract. List each cover exactly as written (for example, “public liability”, “products liability”, “professional indemnity”). A gap is a cover named in the contract that does not appear in your policy schedule.
  • Minimum limits for each cover, including any aggregate limits. Note whether the limit is per occurrence or aggregate, and whether it includes defence costs. A contract asking for a higher aggregate limit than your policy grants per occurrence can be a gap even when the headline numbers look similar.
  • Additional insured or interested party requirements. Check whether the other side must be named as an additional insured or merely noted as an interested party. The first changes who your insurer protects; the second is usually a notation only.

For each line, record the contract requirement, the policy position, and the resulting gap or overlap. That record becomes the basis for prioritisation later.

Documents to Gather Before the Review Starts

Gather these before anyone opens a contract:

  • Every current insurance policy and its full policy wording
  • All schedules and endorsements
  • The commercial agreement or standard contractual terms in question

Missing documents can cause a review to stall. If you can’t produce the full schedule, the review can’t confirm limits.

Watch out: a certificate of insurance is evidence that cover existed on the date it was issued, not proof that it matches the contract. Reviewers who rely on the certificate alone can miss limit and endorsement differences that only appear in the full policy wording.

Reading the Insurance Clauses in Contracts That Create Exposure

The clauses that create real exposure are rarely the obvious ones. Look for these:

Business professionals conducting a contractual insurance review by comparing policy schedules and contract clauses.
Business professionals conducting a contractual insurance review by comparing policy schedules and contract clauses.

Indemnity and hold harmless. You promise to cover someone else’s loss. That promise has no cap unless the contract sets one.

Limit of liability. A cap on your liability is good.

Additional insured. The other side wants to be named on your policy. That changes who your insurer protects.

Waiver of subrogation. You give up your insurer’s right to recover from the other party.

Professional indemnity insurance requirements.

Insurance clauses in contracts often reference a cover your policy excludes. That’s the gap that matters.

Contact Us →

How a Contractual Liability Insurance Review Handles Indemnities and Limits

A contractual liability insurance review tests whether your policy responds when a contract makes you liable for someone else’s acts.

The review asks three questions:

  • Does the policy cover liability you assumed under contract?
  • Is that cover limited to specific contract types?
  • Does the limit match what the contract demands?

This is where indemnity, hold harmless and limit of liability wording get tested together. A contract can require a limit your policy never grants.

For a broader assessment of limits and indemnity exposure across your whole programme, an insurance programme review looks past a single contract.

Public Liability Insurance Contract Requirements Across Leases, Supply and Construction Agreements

Public liability insurance contract requirements change by agreement type. The same policy can pass one contract and fail the next.

Agreement type Typical requirement Common gap
Lease Public liability cover, landlord named as interested party Certificate not updated after renewal
Supply agreement Product liability, recall cover Policy excludes faulty workmanship
Construction contract Contract works, plant, subcontractor cover Subcontractors uninsured or underinsured
Consultancy agreement Professional indemnity Cover written on a claims-made basis

Construction readers face the heaviest requirements.

Prioritising, Negotiating and Fixing the Gaps You Find

Not every gap needs fixing. Some need negotiating. Some need a different clause. The step most guides skip is turning findings into ranked decisions, so this section sets out a severity framework and the negotiation options that follow.

Rank Each Gap by Severity

Score every gap on two axes: how likely it is to be triggered, and how much it would cost if it were. A simple three-by-three matrix is enough.

  • High likelihood, high cost. Fix first. These combine a common trigger (for example, a subcontractor injury on a construction site) with an uncapped or large exposure. Amend the contract or extend the policy before work starts.
  • High likelihood, low cost. Fix cheaply. Often a limit or notification wording issue correctable by endorsement or contract amendment at little cost.
  • Low likelihood, high cost. Insure or negotiate. Tail risks, a product recall under a supply agreement, for example. If the contract requires cover you don’t hold, extend the policy or negotiate the clause down.

Ranking gaps helps surface the most dangerous one, which might otherwise be buried in a long list.

Choose a Route for Each Ranked Gap

Once ranked, each gap takes one of four routes:

  • Amend the contract where the requirement is unreasonable or exceeds market practice. Usually the cheapest fix, but it depends on the other side’s willingness to move.
  • Extend the policy where the requirement is fair but uninsured. An endorsement, an increased limit or an additional cover can close the gap, usually at a premium.
  • Negotiate a mutual cap where the contract imposes an uncapped indemnity. Replacing an uncapped promise with a cap tied to your insurance limit is a common outcome.

Negotiation Mechanics That Actually Move Clauses

A few practical levers:

  • Offer the certificate, not the promise. If the other side wants evidence of cover, a certificate showing the limit and endorsements often satisfies the requirement without changing the policy.
  • Trade scope for risk. If the other side insists on an uncapped indemnity, offer a narrower scope of work or a defined deliverable in exchange for a cap.
  • Use the policy wording as the anchor. Proposing clause language that mirrors your policy’s grant of cover is easier to accept than proposing a number, because it is defensible as market standard.

Watch out: accepting a gap informally is a mistake to avoid. If you carry the risk, record the decision and the amount, and note who approved it. An undocumented acceptance can be hard to tell apart from an oversight when a claim arrives.

What the Service Does Not Do

A contractual insurance review is not legal advice, not a negotiation service, and not a guarantee that a claim will be paid. It compares contract requirements against policy wording and identifies mismatches. It does not draft contract amendments, conduct the negotiation on your behalf, or bind an insurer to a coverage position.

Once gaps are identified and ranked, a broker can help close them. Contact us to review your position.

Frequently Asked Questions

What is a contractual insurance review?

It is a check that compares the insurance obligations written into a contract against the cover you actually hold. A broker or adviser reads the insurance clauses, indemnities, liability caps and insurance requirements, then compares them with your policy wording, limits and exclusions. The output is a list of gaps, mismatches and clauses worth negotiating before you sign. It is not a legal opinion on the contract, so anything ambiguous in the drafting still needs a lawyer.

Which insurance clauses should a business check before signing a contract?

Start with the indemnity and hold harmless wording, the limit of liability and whether it is capped or unlimited, and any requirement to name another party as additional insured. Then check waiver of subrogation clauses, the required policy types and limits, the certificate of insurance obligations, and notice periods for claims. Also check whether the contract makes you responsible for the other party’s legal costs, and whether your professional indemnity insurance responds to the work being described.

How can a contract create gaps in business insurance cover?

A contract can promise more than your policy will pay. If you agree to an unlimited indemnity, accept liability for consequential loss, or take on obligations for property you do not control, the policy may exclude or limit that exposure. Gaps also appear when the required limit is higher than your current cover, when a subcontracted task falls outside your policy description, or when a waiver of subrogation is demanded but your insurer has not agreed to it. Reviewing clauses before signing is how you catch these early.

Can an insurance broker review a contract’s insurance requirements?

Yes. A qualified broker can read the insurance and liability clauses, tell you whether your current programme meets them, and identify what needs to change in the policy or the contract. The broker cannot give legal advice on the contract’s meaning, so the practical split is: the broker handles cover, limits and policy wording, and a lawyer handles drafting, enforceability and disputes. Many businesses run both in parallel before signing a large commercial agreement.


Contractual requirements move faster than policy renewal cycles. If your contracts have changed since your last review, the cover behind them may not match. Shockwave Insurance Brokers offers personalised, strategic insurance advice, proactive risk management and support navigating contractual requirements from placement through to claims. Get started with Shockwave Insurance Brokers and put your contracts and cover back in step.

Written by


Other insights

Risk Transfer Solutions for Businesses: A Practical Guide

Risk transfer solutions move the cost of major losses onto insurers, captives or parametric cover.

Is Public Liability Insurance for Tradies Worth It?

Public liability insurance for tradies explained: what's covered, what's excluded, coverage limits and cost drivers. Compare policies and get a quote now.

How to Run a Contractual Insurance Review

Run a contractual insurance review to check your policy against contract demands. Learn the clause-by-clause workflow and negotiation steps to close gaps.